NUBRIKON CP
 CERAMIC POTTING COMPOUND

Nubrikon CP is an excellent electrically insulating ceramic potting compound useful for electronic applications. This general purpose cement is used to pot and coat electric resistors, thermocouples, transformers, seal ends of capacitors, and cement insulators and flame ignitors to metals, glass, and other ceramics. Nubrikon CP will prevent vibration loosening of components that have been potted in the cement.

The ceramic compound is very resistant to thermal shock and can withstand rapid heating or cooling at wide temperature fluctuations. The cured cement has a very high density and low porosity. It has low permeability to gasses, even at very high temperatures. Molten metals such as copper, solder, and flux will not stick to Nubrikon CP.

Nubrikon CP is supplied as a single-component dry white powder that is mixed with water to use. The compound sets by chemical reaction forming an almost impervious ceramic within 24 hours. When dry, the cement can be brought to any temperature up to 2800ºF (1538ºC) as rapidly as desired. The compound does not contain asbestos or other fibers, and produces no noxious off-gasses when curing. The cured cement is very strong and can withstand high structural loads without cracking. It has high thermal conductivity and adheres strongly to metals, ceramics, glass, and some plastics.